FlyFishRC M10 Mini GPS Module
Technical Highlights
Compact M10 GPS Module
The FlyFishRC M10 Mini combines a u-blox 10th-generation GNSS platform with a 16.2 × 12.3 × 4.9 mm module footprint. Its compact format is suited to FPV builds with limited mounting space.
12 × 12 mm Ceramic Patch Antenna
An integrated RHCP ceramic patch antenna provides satellite reception without a separate external antenna. The manufacturer lists a 12 × 12 mm antenna size.
Lightweight UART Integration
At 2.4 g ± 0.5 g, the module adds little weight to a drone build. RXD and TXD provide the UART data connection, while VCC and GND provide power.
Technical Specifications
| Brand and model | FlyFishRC M10 Mini GPS Module |
|---|---|
| GNSS platform | u-blox 10th generation |
| Antenna | Integrated 12 × 12 mm RHCP ceramic patch |
| Speed accuracy | 0.05 m/s |
| Tracking sensitivity | -167 dBm |
| Cold start | 30 s |
| Hot start | 1–3 s |
| Baud rate | 4,800–115,200 bps; 115,200 bps recommended |
| Operating voltage | 3.3–5 V; 5 V typical |
| Interface | UART: RXD and TXD; power: VCC and GND |
| Module dimensions | 16.2 × 12.3 × 4.9 mm |
| Weight | 2.4 g ± 0.5 g |
Installation Notes
Connect the flight controller TX pad to the GPS RXD pad and the flight controller RX pad to the GPS TXD pad.
Connect VCC and GND to a suitable power supply within the stated operating-voltage range.
Configure the GPS port and protocol in the flight-controller firmware before flight. The manufacturer manual provides Betaflight setup guidance.
Verify GPS reception and any rescue-mode configuration on the ground before relying on them in flight.
Recommended Applications
Compact FPV freestyle and long-range drone builds that need a lightweight, UART-connected GPS module for flight-controller positioning data.
FAQ
What voltage does the FlyFishRC M10 Mini GPS Module require?
Use a 3.3–5 V supply, with 5 V as the typical value. The manufacturer's product page and manual give different upper limits, so this range uses the value supported by both.
How does the module connect to a flight controller?
Connect the module's RXD and TXD pads to the corresponding crossed UART TX and RX connections on the flight controller. VCC and GND provide power.
Does this module include a separate external antenna?
No separate antenna is required for the listed module. It has an integrated 12 × 12 mm RHCP ceramic patch antenna.
Can the published 0.05 m/s value be used as positioning accuracy?
No. The 0.05 m/s figure is speed accuracy. The manufacturer does not publish a positioning-accuracy value for this exact M10 Mini model in the checked product information.
B2B Procurement FAQ
What should buyers confirm before placing a bulk order?
Confirm the exact M10 Mini model, antenna-face appearance, operating-voltage specification, packaging, quantity and current availability during quotation.
Is customization or OEM packaging available?
Customization and OEM packaging are not established by the supplied product information. Confirm any such requirement during quotation.
What are the MOQ and lead time?
MOQ and lead time are not established by the supplied product information and must be confirmed for the requested order quantity.
