3.3GHz 10W 64CH Analog FPV Video Transmitter

Short Description:

3.3 GHz analog FPV VTX with 64 channel positions (3060–3500 MHz), PIT/25 mW/1 W/4 W/7 W/10 W settings, IRC control and 12–30 V input.

Product Name: 3.3GHz 10W 64CH Analog FPV Video Transmitter
Product Type: Analog FPV video transmitter (VTX)
Frequency Range: 3060–3500 MHz listed channel-center frequencies
Channels: 64 selectable positions across 8 groups; some frequencies repeat
Output Power: PIT / 25 mW / 1 W / 4 W / 7 W / 10 W selectable settings
Input Voltage: 12–30 V DC
Control Protocol: IRC, as stated in the manual
Mounting Hole: 20 × 20 mm / 25 × 25 mm
Dimensions: 69 × 37 × 17 mm; stated length excludes the antenna connector
Video System: PAL / NTSC analog video

Send email to us

Product Detail

FAQ

Technical Highlights

Eight Channel Groups

The manual lists eight groups with eight selectable positions per group. Channel-center frequencies span 3060 to 3500 MHz. Some center frequencies recur in different groups, so 64CH does not mean 64 distinct frequencies.

Power Settings up to 10 W

Selectable settings are PIT, 25 mW, 1 W, 4 W, 7 W and 10 W. The 10 W figure is the highest listed setting; continuous-output conditions and measurement tolerance are not supplied.

IRC and Onboard Button Control

The cable interface includes an IRC-labeled pin. The manual also states that frequency can be configured through Betaflight. Onboard buttons select power level, channel position and group, with LED flash indications.

Finned Housing with Fan Cooling

The photographed transmitter has a finned housing and fan. Maintain clearance and airflow around the unit; the manual warns that overheating can reduce transmit power or stop RF output.

Channel Frequencies

Group	CH1 / CH2 / CH3 / CH4 / CH5 / CH6 / CH7 / CH8 (MHz)
FR1	3360 / 3380 / 3400 / 3420 / 3440 / 3460 / 3480 / 3500
FR2	3200 / 3220 / 3240 / 3260 / 3280 / 3300 / 3320 / 3340
FR3	3330 / 3350 / 3370 / 3390 / 3410 / 3430 / 3450 / 3470
FR4	3170 / 3190 / 3210 / 3230 / 3250 / 3270 / 3290 / 3310
FR5	3320 / 3345 / 3370 / 3395 / 3420 / 3445 / 3470 / 3495
FR6	3310 / 3330 / 3355 / 3380 / 3405 / 3430 / 3455 / 3480
FR7	3220 / 3240 / 3260 / 3280 / 3300 / 3320 / 3340 / 3360
FR8	3060 / 3080 / 3100 / 3120 / 3140 / 3160 / 3180 / 3200

Electrical and Mechanical Specifications

Video input	PAL / NTSC analog camera video
Power settings	PIT / 25 mW / 1 W / 4 W / 7 W / 10 W
Input voltage	12–30 V DC
RF connector	Detachable SMA antenna connection
Cable interface	8-pin, 1.0 mm
Pin assignment	1 GND; 2 12–30 V; 3 12–30 V; 4 GND; 5 IRC; 6 5V-OUT; 7 TX-EN; 8 VIDEO
Mounting hole pattern	20 × 20 mm / 25 × 25 mm
Dimensions	69 × 37 × 17 mm; stated length excludes the antenna connector

Installation Notes

Check the 12–30 V input range, connector pinout and polarity before applying power.
Attach a suitable antenna to the SMA RF output before powering the transmitter.
Leave space around the finned housing and maintain airflow for cooling, especially at higher power settings.
Set the analog video receiver to the exact channel-center frequency selected on the transmitter.
The manual identifies a 5V-OUT pin but provides no current rating for it; confirm the connected load before use.

FAQ

Does 64CH mean 64 different frequencies?

No. The manual lists 64 selectable channel positions across eight groups, but some center frequencies are repeated between groups.

What frequency span is listed in the channel table?

The listed channel-center frequencies run from 3060 to 3500 MHz. Select a receiver that supports the exact transmitter frequency.

Is 10 W a guaranteed continuous-output rating?

10 W is the highest selectable power setting in the manual. Continuous-output test conditions, measurement tolerance and thermal derating data are not provided.

What supply voltage is required?

The documented input range is 12–30 V DC. Verify the connector pin assignment and polarity before applying power.

What control interface does the manual identify?

It labels the control pin IRC and states that frequency can be set through Betaflight. It does not identify a more specific IRC variant.