4.9–6.2GHz 10W 104CH Analog FPV Video Transmitter

Short Description:

Analog FPV VTX with 104 channel positions spanning 4867–6184 MHz, PIT/25 mW/2 W/5 W/8 W/10 W settings, IRC control and 12–30 V input.

Product Name: 4.9–6.2GHz 10W 104CH Analog FPV Video Transmitter
Product Type: Analog FPV video transmitter (VTX)
Frequency Range: 4867–6184 MHz listed channel-center frequencies
Channels: 104 selectable positions across 13 groups; some frequencies repeat
Output Power: PIT / 25 mW / 2 W / 5 W / 8 W / 10 W selectable settings
Input Voltage: 12–30 V DC, as stated in the product description and wiring image
Control Protocol: IRC, as stated in the manual
Mounting Hole: 20 × 20 mm / 25 × 25 mm
Dimensions: 69 × 37 × 17 mm; stated length excludes the antenna connector
Weight: 66 g

Send email to us

Product Detail

FAQ

Technical Highlights

104 Selectable Channel Positions

The manual lists 13 channel groups with eight positions each. Their center frequencies span 4867 to 6184 MHz. Some frequencies recur in different groups, so 104CH refers to selectable positions rather than 104 distinct frequencies.

Selectable Power Settings up to 10 W

The listed settings are PIT, 25 mW, 2 W, 5 W, 8 W and 10 W. The 10 W figure is the highest selectable setting; the manual does not provide continuous-output test conditions or power tolerance.

IRC and Onboard Button Control

The cable interface includes an IRC-labeled pin, and the manual states that frequency can be configured through Betaflight. Onboard buttons select power, channel position and group, with LED flash indications.

Finned Housing with Fan Cooling

The illustrated transmitter has a finned housing and fan. Maintain installation clearance and airflow; the manual warns that overheating can reduce transmit power or stop RF output.

Channel Frequencies

Group	CH1 / CH2 / CH3 / CH4 / CH5 / CH6 / CH7 / CH8 (MHz)
1	5865 / 5845 / 5825 / 5805 / 5785 / 5765 / 5745 / 5725
2	5733 / 5752 / 5771 / 5790 / 5809 / 5828 / 5847 / 5866
3	5705 / 5685 / 5665 / 5645 / 5885 / 5905 / 5925 / 5945
4	5740 / 5760 / 5780 / 5800 / 5820 / 5840 / 5860 / 5880
5	5658 / 5695 / 5732 / 5769 / 5806 / 5843 / 5880 / 5917
6	5362 / 5399 / 5436 / 5473 / 5510 / 5547 / 5584 / 5621
7	5325 / 5348 / 5366 / 5384 / 5402 / 5420 / 5438 / 5456
8	5474 / 5492 / 5510 / 5528 / 5546 / 5564 / 5582 / 5600
9	5653 / 5693 / 5733 / 5773 / 5813 / 5853 / 5893 / 5933
0	4990 / 5020 / 5050 / 5080 / 5110 / 5140 / 5170 / 5200
U	4867 / 4884 / 4921 / 4958 / 4995 / 5032 / 5069 / 5099
H	5960 / 5980 / 6000 / 6020 / 6040 / 6060 / 6080 / 6100
P	6002 / 6028 / 6054 / 6080 / 6106 / 6132 / 6158 / 6184

Electrical and Mechanical Specifications

Video input	PAL / NTSC analog camera video
Power settings	PIT / 25 mW / 2 W / 5 W / 8 W / 10 W
Input range	12–30 V DC, according to the product description and wiring image
Supply pin label	Pins 2 and 3 are labeled 24V in the connector table; confirm the supplied board revision before wiring
RF connector	Detachable SMA antenna connection
Cable interface	8-pin, 1.0 mm
Pin assignment	1 GND; 2 24V; 3 24V; 4 GND; 5 IRC; 6 5V-OUT; 7 TX-EN; 8 VIDEO
Mounting hole pattern	20 × 20 mm / 25 × 25 mm
Dimensions	69 × 37 × 17 mm; stated length excludes the antenna connector
Weight	66 g

Installation Notes

Confirm the input marking and pinout on the supplied production revision before applying power; the manual gives a 12–30 V input range but labels the supply pins 24V.
Verify supply polarity and attach a suitable antenna to the SMA RF output before powering the transmitter.
Maintain clearance and airflow around the housing, particularly when using higher power settings.
Set the analog video receiver to the exact center frequency selected on the transmitter.
The manual identifies a 5V-OUT pin but gives no current rating; confirm the intended load before using this output.

FAQ

Does 104CH mean 104 different frequencies?

No. The manual lists 104 selectable positions in 13 groups, but some center frequencies are repeated between groups.

Why does the channel table include 4867 MHz?

The product is named for the approximate 4.9–6.2 GHz band, while the manual's detailed table begins at 4867 MHz and ends at 6184 MHz.

Is 10 W a guaranteed continuous-output rating?

10 W is the highest selectable setting listed in the manual. Continuous-output conditions, measurement tolerance and thermal derating data are not supplied.

Should the input be 12–30 V or 24 V?

The product description and wiring image specify 12–30 V input, while the connector table labels the two supply pins 24V. Confirm the marking and wiring for the supplied board revision before applying power.

What control interface is identified?

The manual labels the control pin IRC and states that frequency can be configured through Betaflight. It does not identify a more specific IRC variant.