6.2–7.2GHz 10W 64CH Analog FPV Video Transmitter

Short Description:

6.2–7.2 GHz analog FPV VTX with 64 channel positions (6110–7210 MHz), PIT/25 mW/2 W/5 W/8 W/10 W settings, IRC control and 12–30 V input.

Product Name: 6.2–7.2GHz 10W 64CH Analog FPV Video Transmitter
Product Type: Analog FPV video transmitter (VTX)
Frequency Range: 6110–7210 MHz listed channel-center frequencies
Channels: 64 selectable positions across 8 groups
Output Power: PIT / 25 mW / 2 W / 5 W / 8 W / 10 W selectable settings
Input Voltage: 12–30 V DC, as stated in the product description and wiring image
Control Protocol: IRC, as stated in the manual
Mounting Hole: 20 × 20 mm / 25 × 25 mm
Dimensions: 69 × 37 × 17 mm; stated length excludes the antenna connector
Weight: 66 g

Send email to us

Product Detail

FAQ

Technical Highlights

64 Channel Positions

The manual provides eight channel groups with eight positions each. Listed channel-center frequencies span 6110 to 7210 MHz. Set the matching frequency on the analog video receiver.

Selectable Power Settings up to 10 W

The listed settings are PIT, 25 mW, 2 W, 5 W, 8 W and 10 W. The 10 W figure is the highest selectable setting; continuous-output test conditions and power tolerance are not supplied.

IRC and Onboard Button Control

The cable interface includes an IRC-labeled pin. The manual also states that frequency can be configured through Betaflight. Onboard buttons select power, channel position and group, with LED flash indications.

Finned Housing with Fan Cooling

The illustrated transmitter has cooling fins and a fan. Maintain installation clearance and airflow; the manual warns that overheating can reduce transmit power or stop RF output.

Channel Frequencies

Group	CH1 / CH2 / CH3 / CH4 / CH5 / CH6 / CH7 / CH8 (MHz)
A	6110 / 6130 / 6150 / 6170 / 6190 / 6210 / 6230 / 6250
B	6270 / 6290 / 6310 / 6330 / 6350 / 6370 / 6390 / 6410
E	6430 / 6450 / 6470 / 6490 / 6510 / 6530 / 6550 / 6570
F	6590 / 6610 / 6630 / 6650 / 6670 / 6690 / 6710 / 6730
R	6750 / 6770 / 6790 / 6810 / 6830 / 6850 / 6870 / 6890
P	6910 / 6930 / 6950 / 6970 / 6990 / 7010 / 7030 / 7050
H	7070 / 7090 / 7110 / 7130 / 7150 / 7170 / 7190 / 7210
U	6115 / 6265 / 6425 / 6585 / 6745 / 6905 / 7065 / 7185

Electrical and Mechanical Specifications

Video input	PAL / NTSC analog camera video
Power settings	PIT / 25 mW / 2 W / 5 W / 8 W / 10 W
Input range	12–30 V DC, according to the product description and wiring image
Supply pin label	Pins 2 and 3 are labeled 24V in the connector table; confirm the supplied board revision before wiring
RF connector	Detachable SMA antenna connection
Cable interface	8-pin, 1.0 mm
Pin assignment	1 GND; 2 24V; 3 24V; 4 GND; 5 IRC; 6 5V-OUT; 7 TX-EN; 8 VIDEO
Mounting hole pattern	20 × 20 mm / 25 × 25 mm
Dimensions	69 × 37 × 17 mm; stated length excludes the antenna connector
Weight	66 g

Installation Notes

Confirm the input marking and pinout on the supplied production revision before applying power; the manual gives a 12–30 V input range but labels the supply pins 24V.
Verify supply polarity and attach a suitable antenna to the SMA RF output before powering the transmitter.
Maintain clearance and airflow around the housing, particularly at higher power settings.
Set the analog video receiver to the exact channel-center frequency selected on the transmitter.
The manual identifies a 5V-OUT pin but gives no current rating; confirm the intended load before using this output.

FAQ

What frequencies are listed for this VTX?

The 64 channel positions have center frequencies from 6110 to 7210 MHz. The band name is approximate; use the channel table to match the receiver.

Is 10 W a guaranteed continuous-output rating?

10 W is the highest selectable setting listed in the manual. Continuous-output conditions, measurement tolerance and thermal derating data are not supplied.

Should the power input be 12–30 V or 24 V?

The product description and wiring image specify 12–30 V input, while the connector table labels the two supply pins 24V. Confirm the supplied board revision and its input marking before applying power.

What control interface is identified?

The manual labels the control pin IRC and states that frequency can be configured through Betaflight. It does not identify a more specific IRC variant.